IC200ALG326H 模拟输出模块

IC200ALG326H是一个模拟输出模块，属于Versamax系列。它具备多种功能，如诊断工具和LED指示灯，这有助于简化日常操作流程。该模块的输出为模拟电流源，工作电流在4至20毫安之间，且这些输出是排列成一组的，它们之间不需要隔离。此外，它自带每输出5伏、50毫安的背板电流消耗，最大隔离电压为250伏交流连续电压。该模块的电压范围为18至30伏DC，最大浪涌电流为2安培，空载电流为100毫安，满量程运行时所有8路输出电流为185毫安。

IC200ALG326H模块在启动时，通过逐渐增大晶闸管导通角，使电机启动电流从零线性上升至设定值，从而达到对电机无冲击，提高供电可靠性的目的，实现平稳启动，并减少对负载机械的冲击转矩，延长机器的使用寿命。此外，它还具有软停车功能，即平滑减速，逐渐停机，这有助于克服瞬间断电停机的弊病，减轻对重载机械的冲击，避免高程供水系统的水锤效应，从而减少设备损坏。

IC200ALG326H模块支持Modbus Master/Slave, CCM Slave, DNP3 Master/Slave, SPL等多种协议，每个通信端口支持64个通信任务，并有丰富的通信控制位和状态位可用。

该模块还支持热插拔功能，但需要注意正确执行，否则可能会导致背板电源中断。模块的编程由主CPU执行，建议使用跳线，以便在模块断电时输出可以保持默认状态。

The IC200ALG326H is an analog output module belonging to the Versamax family. It has a variety of features, such as diagnostic tools and LED indicators, which help simplify the daily operation process. The output of the module is an analog current source, operating between 4 and 20 mA, and these outputs are arranged in a group, they do not need to be isolated from each other. In addition, it comes with a backplane current consumption of 5 volts and 50 mA per output, and a maximum isolation voltage of 250 volts AC continuous voltage. The module has a voltage range of 18 to 30 volts DC, a maximum surge current of 2 amps, a no-load current of 100 MA, and a full scale operation of 185 mA for all 8 outputs.

When the IC200ALG326H module is started, the thyristor conduction Angle is gradually increased, so that the motor starting current rises linearly from zero to the set value, so as to achieve the purpose of no impact on the motor, improve the reliability of power supply, achieve smooth start, reduce the impact torque on the load machinery, and extend the service life of the machine. In addition, it also has a soft stop function, that is, smooth deceleration and gradual stop, which helps to overcome the disadvantage of instantaneous power outage and stop, reduce the impact on heavy-duty machinery, and avoid the water hammer effect of the elevation water supply system, thereby reducing equipment damage.

IC200ALG326H module supports Modbus Master/Slave, CCM Slave, DNP3 Master/Slave, SPL and other protocols, each communication port supports 64 communication tasks, and has a wealth of communication control bits and status bits available.

The module also supports hot swap, but you need to perform it correctly; otherwise, the backplane power supply may be interrupted. The programming of the module is performed by the main CPU, and it is recommended to use a jumper so that the output can remain in its default state when the module is powered off.

主要产品：

ABB---AC 800M控制器、贝利、PM866控制器、IGCT可 控硅5SHY 3BHB01 3BHE00 3HNA00 DSQC系列

本特利(BENTLY) ---3500系统/前置器、前后卡、传感器、电源模块、探头、电缆

艾默生(EMERSON) --modbus卡、 电源板、控制器、电源、底座、电源模块、交换机

EPRO --- 数据采集模块、探头、转速传感器、振动传感器、轴振变送器、前置器福克斯波罗(FOXBORO) ---热电阻输入输出模块、电源模块、通讯模块、电缆、控制器、交换机

GE ---模块、空气开关、I/0模块、 显示器、CPU模块、 电源模块、转换器、CPU板、 以太网模块、综合保护装置、电源模块、燃机卡

黑马(HIMA) ---DI模块、处理器模块、AI卡件、脉冲编码器

霍尼韦尔(HONEYWELL) ---安全型数字输出卡、程序模块、模拟输入卡、CPU模块、FIM卡

穆格(MOOG) ---伺服阀、控制器、模块、电源模块

NI ---信息采集卡、PXI模块、卡件、机箱多通道控制卡

西屋(WESTINGHOUSE) ---RTD热电阻输入模块、AI/AO/DI/DO模块、电源模块、控制模块、底座模块.

伍德沃德(WOODWARD) ---调节器、模块、控制器、调速器

横河(Y0KOGAWA) ---伺服模块、控制柜节点单元.

主营产品:

plc、DCS、CPU模块、通讯模块、输入输出模块(AI/A0/I/DO)、电源模块、可控硅模块、端子模块、PXI模块、伺服驱动、伺服电机、

工业显示屏、工业键盘、控制器、编码器、调节器、传感器、I/0板、计数板、光纤接口板、采集卡、燃机卡、FDM卡等自动化备件