ISC40G-TF-T1-05 控制模块

ISC40G-TF-T1-05是一种智能化控制模块，也是一种智能型温度变送器。它能够将热电偶、热电阻及电压等信号转换为标准的模拟信号输出，从而适用于各种工业控制领域，如化工、石油、电力、冶金、造纸等。在这些领域中，它可用于测量和控制各种温度参数。

此模块具有高精度、高可靠性、高稳定性等优点，采用了先进的数字信号处理技术和智能化设计，以实现这些特性。同时，它支持HART协议通信接口，这为用户提供了方便进行远程监控和控制的能力。

ISC40G-TF-T1-05具有32个通道，每个通道具有24V直流的隔离组，并且每16个通道配备一个过程电压监督输入。其工艺电压范围为12~32V直流，名义电压为24V直流，每通道的最大连续输出电流为0.5A。此外，该模块的输出具有防止短路、过电压和过温的功能。

ISC40G-TF-T1-05还可以作为电导率传感器使用，与ISC202两线制电导率仪以及ISC450G四线制电导率仪结合使用，可以满足电导率测量的各种要求。这种新一代的感应式电导率传感器无需改变电池常数或重新标定，即可在宽测量范围以及过程温度范围内提供高度精确的测量。

在实际应用中，安装ISC40G-TF-T1-05时应确保其处于干燥、通风良好的环境中，避免暴露于高温、高湿度环境，以及强烈的机械振动或冲击。同时，应按照产品说明书正确接线和使用，以确保其正常工作和延长使用寿命。

ISC40G-TF-T1-05 is an intelligent control module and an intelligent temperature transmitter. It can convert signals such as thermocouple, thermal resistance and voltage into standard analog signal output, which is suitable for various industrial control fields, such as chemical industry, petroleum, electric power, metallurgy, paper and so on. In these fields, it can be used to measure and control various temperature parameters.

This module has the advantages of high precision, high reliability and high stability, and adopts advanced digital signal processing technology and intelligent design to achieve these characteristics. At the same time, it supports the HART protocol communication interface, which provides users with the ability to facilitate remote monitoring and control.

The ISC40G-TF-T1-05 has 32 channels, each with a 24V DC isolation group, and is equipped with a process voltage supervision input for each 16 channels. The process voltage range is 12 to 32V DC, the nominal voltage is 24V DC, and the maximum continuous output current per channel is 0.5A. In addition, the output of the module has the function of preventing short circuits, overvoltage and overtemperature.

ISC40G-TF-T1-05 can also be used as a conductivity sensor, combined with ISC202 two-wire conductivity meter and ISC450G four-wire conductivity meter, can meet various requirements of conductivity measurement. This new generation of inductive conductivity sensors provides highly accurate measurements over a wide measurement range as well as a process temperature range without changing the battery constant or re-calibration.

In practical applications, ISC40G-TF-T1-05 should be installed in a dry and well-ventilated environment to avoid exposure to high temperature, high humidity, and strong mechanical vibration or shock. At the same time, it should be connected and used correctly in accordance with the product instructions to ensure its normal work and extend its service life.

主要产品：

ABB---AC 800M控制器、贝利、PM866控制器、IGCT可 控硅5SHY 3BHB01 3BHE00 3HNA00 DSQC系列

本特利(BENTLY) ---3500系统/前置器、前后卡、传感器、电源模块、探头、电缆

艾默生(EMERSON) --modbus卡、 电源板、控制器、电源、底座、电源模块、交换机

EPRO --- 数据采集模块、探头、转速传感器、振动传感器、轴振变送器、前置器福克斯波罗(FOXBORO) ---热电阻输入输出模块、电源模块、通讯模块、电缆、控制器、交换机

GE ---模块、空气开关、I/0模块、 显示器、CPU模块、 电源模块、转换器、CPU板、 以太网模块、综合保护装置、电源模块、燃机卡

黑马(HIMA) ---DI模块、处理器模块、AI卡件、脉冲编码器

霍尼韦尔(HONEYWELL) ---安全型数字输出卡、程序模块、模拟输入卡、CPU模块、FIM卡

穆格(MOOG) ---伺服阀、控制器、模块、电源模块

NI ---信息采集卡、PXI模块、卡件、机箱多通道控制卡

西屋(WESTINGHOUSE) ---RTD热电阻输入模块、AI/AO/DI/DO模块、电源模块、控制模块、底座模块.

伍德沃德(WOODWARD) ---调节器、模块、控制器、调速器

横河(Y0KOGAWA) ---伺服模块、控制柜节点单元.

主营产品:

plc、DCS、CPU模块、通讯模块、输入输出模块(AI/A0/I/DO)、电源模块、可控硅模块、端子模块、PXI模块、伺服驱动、伺服电机、

工业显示屏、工业键盘、控制器、编码器、调节器、传感器、I/0板、计数板、光纤接口板、采集卡、燃机卡、FDM卡等自动化备件