REC670 1MRK002814-AC 保护继电器

工作电压:100V-240VAC

工作频率:50/60HZ

最大功耗:10VA

工作温:-40℃至+70℃℃

防护等级:IP40

在制造技术上，REC670 1MRK002814-AC可能涉及到高级封装技术进行集成。随着处理器和存储器等产品的技术发展，以及设计和制造成本的不断增加，异构封装(如SoC和SiP)的需求也在不断增长。这意味着将不同技术制造的芯片一起放在单个封装中，从而大大增加了封装的复杂性。

终端仿真程序，并将通信参数配置为所需软件部分(57600，N，8，1)中显示的参数。3输入"?"字符。如果一切设罟正确，将显示端口的菜单。如果模块没有响应，请检查通信设置和电缆。此外，请确保已连接到计算机只和模块上的正确端口。4.3.4主菜单当您第一次从计算机连接到模块时，您的终端屏草将是空白的。要激活主菜单，请按计算机键盘上的[M键。如果模块连接正确，终端屏幕上将显示以下菜单:注意:此菜单中的某些命令仅用于高级调试和系统测试，可能会导致模块停止与处理器或其他设备的通信，从而导致潜在的数据丢失或其他故障

Working voltage :100V-240VAC

Operating frequency :50/60HZ

Maximum power consumption :10VA

Operating temperature :-40℃ to +70℃

Protection class :IP40

In terms of manufacturing technology, the REC670 1MRK002814-AC May involve integration with advanced packaging technology. With the technological development of products such as processors and memory, and the increasing cost of design and manufacturing, the demand for heterogeneous packages such as SOCs and SIPs is also growing. This means putting chips made with different technologies together in a single package, greatly increasing the complexity of the package.

The terminal emulates the program and configures the communication parameters to the parameters displayed in the desired software section (57600, N, 8,1). 3 Enter "?". Characters. If everything is set up correctly, a menu of ports will be displayed. If the module does not respond, check the communication Settings and cables. Also, make sure you are connected to the computer only and the correct port on the module. 4.3.4 Main Menu When you connect to the module from your computer for the first time, your terminal screen will be blank. To activate the main menu, press the [M key on your computer keyboard. If the module is connected correctly, the following menu will appear on the terminal screen: Note: Some commands in this menu are used only for advanced debugging and system testing, and may cause the module to stop communicating with the processor or other devices, resulting in potential data loss or other failure.