PFTL101A 0.5KN 微位移型张力 检测器

张力传感器，英文:tension pick-up，张力传感器是张力操控过程中，用于丈量卷材张力值大小的仪器。用于制药、应变片型是张力应变片和紧缩应变片依照电桥方法衔接在一起，当受到外压力时应变片的电阳值也随之改变，改变值的多少将正比于所受张力的大小;微位移型是经过外力施加负载，使板簧发生位移，然后经过差接变压器只检测出张力，由于板簧的位移量极小，大约+200um，所以称作微位移型张力检测器。别的，由外型结构上又分为:轴台式、穿轴式、悬臂式等

PFTL101A 0.5KN1 励磁IGCT可控砖 励磁IGCT可控体是一款选用绝缘栅双极晶体管(IGCT)技能的励磁可控体模块,它具有高可靠性、高功率、快速响应等特色，广泛应用于电力系统和电机操控范畴。PFTL101A 0.5KN 励磁IGCT可控硅 概况介绍:PFTL101A 0.5KN励磁(GCT可控硅是一款选用绝缘栅双极晶体管(GCT)技能的励磁可控砫模块。它具有高可靠件，高功率,一泛应用于电力系统和电机操控范畴。
以下是PFTL101A 0.5KN的特色:
高可靠性:选用先进的IGCT技能，具有较低的开关损耗和较高的耐压能力，可以在高电压、大电流的条件下安稳运转，提高了产品的可靠性和安稳性。
高功率:经过优化规划，降低能耗和发热量，提高了产品的功率，有助于减少动力浪费和设备维护本钱。

张力传感器，英文:tension pick-up，张力传感器是张力操控过程中，用于丈量卷材张力值大小的仪器。用于制药、应变片型是张力应变片和紧缩应变片依照电桥方法衔接在一起，当受到外压力时应变片的电阳值也随之改变，改变值的多少将正比于所受张力的大小;微位移型是经过外力施加负载，使板簧发生位移，然后经过差接变压器只检测出张力，由于板簧的位移量极小，大约+200um，所以称作微位移型张力检测器。别的，由外型结构上又分为:轴台式、穿轴式、悬臂式等

PFTL101A 0.5KN1 励磁IGCT可控砖 励磁IGCT可控体是一款选用绝缘栅双极晶体管(IGCT)技能的励磁可控体模块,它具有高可靠性、高功率、快速响应等特色，广泛应用于电力系统和电机操控范畴。PFTL101A 0.5KN 励磁IGCT可控硅 概况介绍:PFTL101A 0.5KN励磁(GCT可控硅是一款选用绝缘栅双极晶体管(GCT)技能的励磁可控砫模块。它具有高可靠件，高功率,一泛应用于电力系统和电机操控范畴。
以下是PFTL101A 0.5KN的特色:
高可靠性:选用先进的IGCT技能，具有较低的开关损耗和较高的耐压能力，可以在高电压、大电流的条件下安稳运转，提高了产品的可靠性和安稳性。
高功率:经过优化规划，降低能耗和发热量，提高了产品的功率，有助于减少动力浪费和设备维护本钱。

tension sensor, English :tension pick-up, tension sensor is used to measure the tension value of the coil during tension control. The strain gauge type is the tension strain gauge and the contraction strain gauge are connected together according to the bridge method. When the external pressure is applied, the positive value of the strain gauge will also change, and the amount of the changed value will be proportional to the size of the tension. The micro-displacement type is the displacement of the plate spring after the external force is applied to the load, and then the differential transformer only detects the tension, because the displacement of the plate spring is very small, about +200um, so it is called the micro-displacement tension detector. In addition, it is divided into: shaft table, through shaft type, cantilever type and so on

PFTL101A 0.5KN1 exciter IGCT Controllable brick Exciter IGCT controllable block is a kind of exciter controllable block which uses the skill of insulated gate bipolar transistor (IGCT). It has the characteristics of high reliability, high power, fast response, etc., and is widely used in the field of power system and motor control. PFTL101A 0.5KN Excitation IGCT SCR Overview :PFTL101A 0.5KN excitation (GCT SCR is a selection of insulated gate bipolar transistor (GCT) technology excitation controllable Monoliths module. It has high reliability, high power, and is widely used in the field of power system and motor control.

The following are the PFTL101A 0.5KN features:

High reliability: The selection of advanced IGCT skills, with low switching loss and high voltage resistance, can operate stably under high voltage and high current conditions, improve the reliability and stability of the product.

High power: Through optimized planning, reduce energy consumption and heat, improve the power of the product, help to reduce power waste and equipment maintenance costs.