129740-002 系统控制器

1.数字输入/输出功能:
129740-002模块提供了16个数字输入通道和16个数字输出通道，允许与外部设备或传感器进行数字信号的交换，输入通道可以接收来自传感器的数字信号，如开关状况、传感器触发等。
输出通道则可以控制外部设备的开关状况，如电机、灯火、阀门等。
日常保养:
清洁控制器:定时使用干燥的软布擦洗控制器的外壳和接口，以去除灰尘和污垢。防止使用含有化学物质的清洁剂，以免对控制器造成危害。
检查衔接:定时检查控制器与电源、传感器和其他设备的衔接是否结实。假如发现衔接松动或损坏，应及时更换或修复。防潮防尘:将控制器放置在干燥、无尘的环境中，以防止潮湿和灰尘对控制器的影响。定时备份数据:定时备份控制器的配置和数据，以防意外状况导致数据丢失。检查电源和电缆:保证控制器的电源和电缆衔接良好，没有过热或损坏的迹象检查功能:定时检查控制器的工作状况是否正常，以保证其可以正常工作。

1. Digital input/output function:

The 129740-002 module provides 16 digital input channels and 16 digital output channels to allow the exchange of digital signals with external devices or sensors, and the input channel can receive digital signals from the sensor, such as switch status, sensor trigger, etc.

The output channel can control the switching conditions of external devices, such as motors, lights, valves, etc.

Daily maintenance:

Clean the controller: Periodically scrub the enclosure and interfaces of the controller with a dry soft cloth to remove dust and dirt. Prevent the use of cleaners containing chemical substances, so as not to cause harm to the controller.

Check connection: Regularly check whether the connection between the controller and the power supply, sensors and other devices is strong. If the connection is found to be loose or damaged, it should be replaced or repaired in time. Moisture-proof and dust-proof: Place the controller in a dry and dust-free environment to prevent moisture and dust from affecting the controller. Periodically back up data: Periodically back up controller configuration and data to prevent data loss. Check the power supply and cable: ensure that the power supply and cable of the controller are properly connected, and there is no sign of overheating or damage. Check function: Periodically check whether the working condition of the controller is normal to ensure that it can work normally.