PHARPS32000000 可编程序控制器

PHARPS32000000 可编程序控制器

连接器与接口：PHARPS32000000配备了9针的Sub_D插孔连接器，其管脚定义符合Profibus DP的协议规范。

光纤接口支持多模和单模光纤，传输距离分别为2Km和20Km。光纤接口类型有SC、FC、ST可选，标配为SC光接口。

通信与速率：支持Profibus DP总线标准，通信速率支持多种选择，包括9.6kBit/s、19.2 kBit/s、187.5kBit/s、1.5MBit/s、6MBit/s和12MBit/s等。

速率设置可以通过自动识别或拨码开关进行设置。

电源与保护：PHARPS32000000 采用双电源冗余输入，工作电压范围为DC(9-36)V，典型功耗小于4W。

具有DC1500V电压隔离和反接保护功能，工业端子接口。

机械与环境：外形尺寸为132mm105mm52mm，外壳具有IP30防护等级。

工作温度范围为-10-70℃（可选宽温范围为-40~+85℃），相对湿度应小于或等于90%（无冷凝）。

信号隔离与传输：支持正、负电压输入，对应正、负电压隔离输出，适用于DCS等工控设备，能有效消除地回流，解决工业现场干扰及信号转换、传输和匹配问题。

可编程控制：PHARPS32000000可编程序控制器是一种数字运算操作电子系统，专为工业环境设计。通过其内部的可编程序存储器，执行逻辑运算、顺序控制、定时、计数和算术运算等操作指令，

并通过数字和模拟的输入和输出，控制各种类型的机械或生产过程。

PHARPS32000000 Programmable controller

Connectors and interfaces: The PHARPS32000000 is equipped with a 9-pin Sub_D jack connector whose pin definition complies with the Profibus DP protocol specification.

The optical fiber interface supports multi-mode and single-mode optical fibers with transmission distances of 2Km and 20Km respectively. The optical fiber port type can be SC, FC, or ST. SC optical ports are standard.

Communication and rate: Support Profibus DP bus standard, communication rate support a variety of options, including 9.6kBit/s, 19.2 kBit/s, 187.5kBit/s, 1.5MBit/s, 6MBit/s and 12MBit/s.

Rate Settings can be set by automatic identification or dip switches.

Power and protection: PHARPS32000000 Dual power supply redundant input, operating voltage range DC(9-36)V, typical power consumption is less than 4W.

With DC1500V voltage isolation and reverse protection function, industrial terminal interface.

Mechanical and environmental: The overall dimension is 132mm105mm52mm, and the housing has IP30 protection class.

The operating temperature range is -10-70℃ (optional wide temperature range is -40 ℃ to +85℃), and the relative humidity should be less than or equal to 90% (no condensation).

Signal isolation and transmission: support positive and negative voltage input, corresponding to positive and negative voltage isolation output, suitable for DCS and other industrial control equipment, 

can effectively eliminate reflux, to solve industrial site interference and signal conversion, transmission and matching problems.

Programmable control: The PHARPS32000000 programmable controller is a digital operational electronic system designed for industrial environments. Through its internal programmable memory, it 

performs operational instructions such as logical operations, sequence control, timing, counting and arithmetic operations, and controls various types of machinery or production processes through 

digital and analog inputs and outputs.

主要产品：

ABB---AC 800M控制器、贝利、PM866控制器、IGCT可 控硅5SHY 3BHB01 3BHE00 3HNA00 DSQC系列

本特利(BENTLY) ---3500系统/前置器、前后卡、传感器、电源模块、探头、电缆

艾默生(EMERSON) --modbus卡、 电源板、控制器、电源、底座、电源模块、交换机

EPRO --- 数据采集模块、探头、转速传感器、振动传感器、轴振变送器、前置器福克斯波罗(FOXBORO) ---热电阻输入输出模块、电源模块、通讯模块、电缆、控制器、交换机

GE ---模块、空气开关、I/0模块、 显示器、CPU模块、 电源模块、转换器、CPU板、 以太网模块、综合保护装置、电源模块、燃机卡

黑马(HIMA) ---DI模块、处理器模块、AI卡件、脉冲编码器

霍尼韦尔(HONEYWELL) ---安全型数字输出卡、程序模块、模拟输入卡、CPU模块、FIM卡

穆格(MOOG) ---伺服阀、控制器、模块、电源模块

NI ---信息采集卡、PXI模块、卡件、机箱多通道控制卡

西屋(WESTINGHOUSE) ---RTD热电阻输入模块、AI/AO/DI/DO模块、电源模块、控制模块、底座模块.

伍德沃德(WOODWARD) ---调节器、模块、控制器、调速器

横河(Y0KOGAWA) ---伺服模块、控制柜节点单元.

主营产品:

plc、DCS、CPU模块、通讯模块、输入输出模块(AI/A0/I/DO)、电源模块、可控硅模块、端子模块、PXI模块、伺服驱动、伺服电机、

工业显示屏、工业键盘、控制器、编码器、调节器、传感器、I/0板、计数板、光纤接口板、采集卡、燃机卡、FDM卡等自动化备件