3BHB030310R0001 伺服控制器

1394C -SJT22-A 是一款 Allen-Bradley 伺服控制器，具有模拟模块功能和 10 代直流模拟接口。它是一个 C 系列系统模块，具有智能电源、EMI 过滤和改进的终端等功能。1394C -SJT22-A系统最多可支持四个轴并用作速度或扭矩控制器。它带有 Bulletin 1201 人机界面模块，允许自动调整和快速启动。这个1394C-SJT22-A还有一个SCANport接口，直流电压下连续输出电流33.8安培，连续输出功率22千瓦，和一个三相电源。1394C-SJT22-A 具有电源输入，例如 24 伏交流电源、断开功能、保险丝盒以及用于电机制动器和热触点的 24 伏直流电源

Allen-Bradley 伺服控制器 1394C-SJT22-A 是一个具有端接、滤波 (EMI) 和智能电源系列增强功能、

模拟输入 (10 VDC)、22 kW 额定功率和360-480AC 输入电压的系统1394C-SJT22-A 是一款具有模拟模块功能和0 V 直流模拟接的艾伦-布拉德利同服控制器。

它是一个C系列系统模块，具有智能电源、EMI滤波和改进的端接等功能.1394C-SJT22-A 系统最多可支持四个轴，并用作速度或扭矩控制器它带有 Bulletin 1201 人机界面模块，可实现自动调谐和快速启动。这款 1394C-SJT22-A还具有 SCANport 接口、直流电压下33.8 安培的连续输出电流22 kW 的连续输出功率和三相电源

1394C-SJT22-A 具有电源输入，例如 24 伏交流电源、断开功能、保险丝块和用于电机制动器和热触点的 24 伏直流电源

1394C-SJT22-A在 324 至528 伏交流电 (50 至60 赫兹)的电源下工作，效率为98%

1394C-SJT22-A的电容为 660 uF，电感为 500 H，需要一个外部分流模块1394C-SJT22-A 具有诊断功能，包括电流监视器、热过载检测和反馈信号监视器此外，它还具有用于系统和轴模块的状态 LED。还包括电气噪声保护和改进的接地端接。

The 1394C-SJT22-A is an Allen-Bradley servo controller with analog module functionality and a 10th-generation DC analog interface. It is a CSeries system module with features such as smart power, EMI filtering and improved terminals. The 1394C-SJT22-A system supports up to four axes and is used as a speed or torque controller. It comes with a Bulletin 1201 human-machine interface module that allows for automatic adjustment and quick startup. The 1394C-SJT22-A also has a SCANport interface, continuous output current of 33.8 amps at DC voltage, continuous output power of 22 kW, and a three-phase power supply. The 1394C-SJT22-A has power inputs such as 24 volt AC power, disconnect function, fuse box, and 24 volt DC power for motor brakes and hot contacts

The Allen-Bradley Servo Controller 1394C-SJT22-A is a series of terminating, filtering (EMI) and smart power enhancements.

System 1394C-SJT22-A with analog input (10 VDC), 22 kW rated power and 360-480AC input voltage is an Allen-Bradley co-service controller with analog module capability and 0 VDC analog connection.

It is a C-series system module with features such as intelligent power supply, EMI filtering and improved terminating. The 1394C-SJT22-A system can support up to four axes and is used as a speed or torque controller. It comes with a Bulletin 1201 HMI module for automatic tuning and fast start. The 1394C-SJT22-A also features a SCANport interface, continuous output current of 33.8 amps at DC voltage, continuous output power of 22 kW, and a three-phase power supply

The 1394C-SJT22-A has power inputs such as 24 volt AC power, disconnect function, fuse block, and 24 volt DC power for motor brakes and hot contacts

The 1394C-SJT22-A operates on a power supply of 324 to 528 volts AC (50 to 60 Hz) with an efficiency of 98%

The 1394C-SJT22-A has a capacitance of 660 uF and an inductance of 500 H, requiring an external shunt module. The 1394C-SJT22-A has diagnostic functions including current monitor, thermal overload detection and feedback signal monitor. In addition, it has status leds for the system and shaft modules. Also included are electrical noise protection and improved ground terminations.