3HAC025338 伺服驱动器

3HAC025338-00206C 是一款机器人伺服驱动器。

3HAC025338-00206C 关于这款伺服驱动器的相关参数，以下是一些关键信息：

电压：该伺服驱动器的电压为24V。

重量：伺服驱动器的重量为2KG。

3HAC025338-00206C 产品特点：

支持标准规范中的预定通信速率。

支持拨码开关手动设置其全部标准速率或者速率自适应（所有电接口速率一致）。

3HAC025338-00206C 具有6个双色LED状态指示灯，电源故障继电器输出告警。

电接口具有4000V的防雷、1.5A过流、600W浪涌保护。

工业级设计，通过EMC测试认证。

具有DC9-36V宽冗余双电源，DC1500V电源隔离，反接保护。

IP30防护等级，采用波浪纹铝制加强机壳，以及标准工业35mm导轨安装方式。

3HAC025338-00206C is a robot servo drive.

3HAC025338-00206C About the parameters of this servo drive, the following is some key information:

Voltage: The voltage of this servo driver is 24V.

Weight: The weight of the servo drive is 2KG.

3HAC025338-00206C Product Features:

Support for predetermined communication rates in standard specifications.

The DIP switch can manually set all its standard rates or rate adaptive (all electrical interfaces have the same rate).

3HAC025338-00206C has 6 two-color LED status indicators, power failure relay output alarm.

Electrical interface with 4000V lightning protection, 1.5A overcurrent, 600W surge protection.

Industrial grade design, through EMC test certification.

3HAC025338-00206C has DC9-36V wide redundant dual power supply, DC1500V power isolation, reverse protection.

IP30 protection class, with wavy aluminum reinforced housing and standard industrial 35mm rail mounting.