3BSE003816R1 模拟量输入模块

3BSE003816R1是模拟量输入模块，用于接收模拟信号并将其转换为数字信号供控制系统使用。

3BSE003816R1 该模块具有模拟量输入功能块和模拟量输出功能块，能够处理过程控制中的模拟信号。

3BSE003816R1 控制原理与I/O配置：

控制原理是通过储存的程序周期运转。

I/O控制方法采用批次处理方法，当执行END指令时，I/O指令可以刷新。

硬体I/O配置点达到256，依赖于用户的选择（软件可设定地址输入256、输出256）。

3BSE003816R1 编程与指令：

支持逻辑梯形图和指令清单作为编程语言。

使用步进梯形图能生成SFC类型程序。

拥有基本顺序指令、步进梯形指令和应用指令等多种指令。

3BSE003816R1 其他规格：

运转处理时间：基本指令为0.8μs/指令，应用指令为1.52至几百μs/指令。

指令数目：基本顺序指令27条，步进梯形指令2条，应用指令128条，可用应用指令298条。

The 3BSE003816R1 is an analog input module for receiving analog signals and converting them into digital signals for use by the control system.

3BSE003816R1 The module has analog input function block and analog output function block, which can handle analog signals in process control.

3BSE003816R1 Control principle and I/O configuration:

The control principle is to operate through stored program cycles.

The I/O control method adopts the batch processing method. When the END command is executed, the I/O command can be refreshed.

The hardware I/O configuration point reaches 256, depending on the user's choice (the software can set the address input 256, output 256).

3BSE003816R1 Programming and instructions:

Supports logical ladder diagrams and instruction lists as programming languages.

The step ladder diagram can be used to generate SFC type programs.

It has a variety of instructions such as basic sequence instruction, step ladder instruction and application instruction.

3BSE003816R1 Other specifications:

Running processing time: basic instruction is 0.8μs/ instruction, application instruction is 1.52 to several hundred μs/ instruction.

Number of instructions: basic sequence instructions 27, step ladder instructions 2, application instructions 128, available application instructions 298.