FI840F 以太网现场总线模块

FI840F是一种高速以太网现场总线模块，设计用于在生产工程中与分散式外围设备进行快速数据交换。

以下是一些关于FI840F的主要参数和特性：

电压与电流：

FI840F的电压范围包括24V，同时支持多种电压如24VDC、110VDC、220VDC等。

电流范围在100-400A。

接口与通信：FI840F具有集成以太网控制器和32位数据总线、32位地址总线，用于模块CPU和协议软件的闪存EPROM。

特点与功能：FI840F是一种全新的现货DCS控制系统电源模块，适用于多种电压。

模块CPU具有独立存储器，同时共用存储器用于主处理器和模块CPU之间的数据交换。

外观与尺寸：重量为2KG。

FI840F is a high-speed Ethernet fieldbus module designed for fast data exchange with distributed peripherals in production engineering.

Here are some of the main parameters and features of the FI840F:

Voltage and current:

The FI840F voltage range includes 24V, and supports a variety of voltages such as 24VDC, 110VDC, 220VDC, etc.

Current range is 100-400A.

Interface and communication: FI840F has an integrated Ethernet controller and 32-bit data bus, 32-bit address bus, flash EPROM for module CPU and protocol software.

Features and functions: FI840F is a new off-the-shelf DCS control system power module, suitable for a variety of voltages.

The module CPU has a separate memory, while the shared memory is used for data exchange between the main processor and the module CPU.

Appearance and size: Weight is 2KG.