FAU810 火焰分析仪

FAU810火焰分析仪是一款用于公用事业和工业锅炉的智能火焰分析单元。

以下是关于FAU810的相关参数和特性：

核心功能：

FAU810能够确定当前信号值是否在功能定义的编程限值范围内。

信号分析：FAU810能够收集和分析火焰检测器的信号值。

持续监控与安全性：FAU810持续监控火焰检测器和其自身的电子元件，以检测系统问题或故障。

远程监控与扩展设置：FAU810支持远程监控，包括参数存档、分组查看、高级诊断等。

规格与配置：探测器可以是SF810火焰扫描头、所有DFS火焰扫描头或火焰棒（离子火焰监测）。

FAU810可由单个或冗余24 VDC电源供电。

易用性与兼容性：FAU810易于安装和配置，并且可以使用冗余Profi总线DP-V1或标准Modbus接口进行数据交换和调整。

可以将任何类型的ABB火焰感应设备连接到FAU810。

应用优势：实时数据显示功能可以精确设置参数，有效见火，并防止偷看现象。

针对不同燃烧工况分别选择不同参数组，并且可以根据当时的背景工况进行火焰跟踪。

The FAU810 Flame Analyzer is an intelligent flame analysis unit for utility and industrial boilers.

The following are the FAU810 parameters and features:

Core functions:

FAU810 is able to determine whether the current signal value is within the programming limits defined by the function.

Signal analysis: The FAU810 collects and analyzes the signal values of the flame detector.

Continuous monitoring and safety: The FAU810 continuously monitors flame detectors and its own electronics to detect system problems or failures.

Remote monitoring and extension Settings: FAU810 supports remote monitoring, including parameter archiving, group viewing, and advanced diagnosis.

Specifications and configuration: The detector can be an SF810 flame scanner head, all DFS flame scanner head or flame rod (ion flame monitor).

The FAU810 can be powered by a single or redundant 24 VDC power supply.

Ease of use and compatibility: FAU810 is easy to install and configure, and data can be exchanged and adjusted using the redundant Profi bus DP-V1 or 

the standard Modbus interface.

Any type of ABB flame sensing device can be connected to the FAU810.

Application advantages: real-time data display function can accurately set parameters, effectively see fire, and prevent peeking phenomenon.

Different parameter groups are selected for different combustion conditions, and flame tracking can be carried out according to the background conditions at that time.